Iota Battery Charger
Iota industrial power
supplies make extremely durable battery chargers which are
reliable and efficient chargers. Iota power supplies are
constant voltage which with a switching regulator that can be used as DC charger. These chargers
are available in wide range of voltages and frequencies ble to maintain full power output and constant
voltage. Power output is such that special filters are not required for
radios and stereos.
External
fuses can be quickly and easily replaced. In the event the batteries or
the DLS unit are wired incorrectly, the DLS converter/power supply is protected
from damage.
Proportional
Fan Circuitry provides an extra measure of protection. During times of heavy
load demands, the automatic circuitry will activate the fan before thermal
stress can occur on any internal components.
|
Model |
Charge Amps |
Battery Voltage |
Watts Power Consumption |
Dimensions in Inches |
Certification |
|
DLS-15 |
15 |
12 V |
378 |
9.7 x 6.7 x 3.4 |
UL 58DL |
|
DLS-27/15 |
15 |
24 V |
756 |
9.7 x 6.7 x 3.4 |
UL 58DL |
|
DLS-48-15 |
15 |
48 V |
725 |
10 x 6.5 x 3.4 |
UL 58DL |
|
DLS-48-20 |
20 |
48 V |
1240 |
13 x 6.5 x 3.4 |
UL 58DL |
|
DLS-27/25 |
25 |
24 V |
756 |
9.7 x 6.7 x 3.4 |
UL 58DL |
|
DLS-30 |
30 |
12 V |
400 |
9.7 x 6.7 x 3.4 |
UL 58DL |
|
DLS-27/40 |
40 |
24 V |
2160 |
13 x 6.5 x 3.4 |
UL 58DL |
|
DLS-45 |
45 |
12V |
600 |
9.7 x 6.7 x 3.4 |
UL 58DL |
|
DLS-55 |
55 |
12 V |
1400 |
9.7 x 6.7 x 3.4 |
UL 58DL |
|
DLS-75 |
75 |
12 V |
1836 |
13 x 6.5 x 3.4 |
UL 58DL |
|
DLS-90 |
90 |
12 V |
2270 |
13 x 6.5 x 3.4 |
|
3-Stage
Charger Module for DLS-15-48
The IQ Smart Controller offers automatic charging control
for DLS Battery Chargers, providing longer and safer use of your system's
battery. The IQ Smart Controller is compatible with any DLS Battery Charger
model and is covered under our standard Two-Year Warranty.
The IQ Controller allows the DLS charger to operate as an automatic 3-stage
"smart charger". This gives the benefit of Bulk, Absorption, and Float stage
charging, increasing
charging capacity of the DLS chargers while decreasing charge times. This
ensures proper and safe battery charging while minimizing over-charging.
The LED
Indicator on the IQ4 informs the user as to the status of the battery and the
charging stage. When first activated, the IQ4 will read the number of cells in
the battery and indicate the voltage of the battery through a number of flashes.
6 flashes = 12 volt battery
12 flashes = 24 volt battery
18 flashes = 36 volt battery
24 flashes = 48 volt battery
After reading the battery, the IQ4 will initiate either a Bulk Charge phase or
Float Charge phase depending on the battery's charge status. When the IQ4 is in
the Bulk Charge mode, the green LED indicator will flash rapidly. When the Bulk
Charge is complete, the IQ4 begins the Absorption Charge and the LED indicator
will flash at a slower rate. When the battery charging is complete and the IQ4
begins the Float Charge, the LED will remain lit and no longer flash. If, when
first activated, the battery is not in need of charging, the IQ4 will
immediately begin the Float charge phase and the LED will be remain lit after it
has counted the battery cells.
| 
